
08-26-2008, 12:05 PM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Oct 2006
Location: Claremore,
OK
Cobra Make, Engine: RUCC, 289 c.i. with a T-5 "Living the Cobra Experience"
Posts: 994
|
|
Not Ranked
Bob, one more vote for an air pocket.
I drilled a small hole in my thermostat & installed it with the hole at the 12 o'clock position. Left the cap off, filled up the system, started the engine, when the thermostat opened & the coolant level dropped, I topped off the system, filled the overflow tank up about 1/3 & shut everything down. Started it again & let it run a few more minutes, saw the coolant in the overflow bubble a little & knew any remaining air was coming out.
No problems at all!
Randy
__________________
Juggernaut
"Living the Cobra Experience"
|