![]() |
351W distributer recommendation
I am considering replacing the MSD ignition in my 351W crate motor. Does anyone have any experience with Performance Distributors in Memphis, TN? I was looking for Ford Duraspark ignitions & found this Co. online. They seem to offer exactly what I want, but I have no knowledge of them. Any thoughts will be greatly appreciated.
|
Ford HEI
Why not try this! I have had an HEI in my car for ages and it is a 1 wire hookup....2 with the tach and absolutely reliable. I even bought one on EBAy for $65-00 ,a billet with cap rotor 50000 Volt coil and just plugged it in about 4 years ago.I rev my car to 8000rpm and it idles smooth.
I have never understood why an expensive troublesome ignition is better!!:confused: http://store.summitracing.com/egnsea...=KeywordSearch john |
I have used their distributors in a couple of my older mustangs. they worked great but were a bit pricey if I remember correctly. the option that CHANMADD offers works really well too. I have used that method and I think dollar for dollar his suggestion is better.
|
Quote:
Called Performance Distributors and told them what happened, they seemed nice and told me to send it back to them for testing, which I did, they sent me back my alternator with a new voltage regulator installed and a type written note saying their voltage regulator was defective and they replaced it under warranty... I called and asked if they would replace my MSD box, since their faulty part fryed it and they plainly said "NO WAY"...I said you admitted your part was bad and destroyed my ignition box, which they agreed to,but refused to even consider paying for a new MSD box and I offered to send at my expense the burnt MSD box for proof... They also agreed that the alternator was putting out 22 volts and would fry any MSD box or pretty much any other ignition box, but they still refused to pay for anything other than the 35 dollar voltage regulator... Since that phone call, I will do NO business with them or any company that treats me in the manner they treated me....... David |
Why were you using something other than a motorcraft alternator / regulator>?
Performance distibutors do seem to work , but they are cheezy looking and you may have issues with clearance of lots of items at the front of the engine. Including : Heater Hose outlets Expansion Tank Hood (depending on config) air cleaner(s) |
| All times are GMT -7. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: