|
intake openings at front sizes
hi all looking for some help on finding out what size the 2 openings are on the intake manifold at the front of my ford mosport 351w crate engine is, its a vic jr single plane intake, i have the factory superformance water temp sender on the left side ( looking at the engine from the front) and need to put it on the other side of the intake, so i need to know the sizes to plug the left one and need to buy the propper fitting to put the sending unit on the other side. anyone know the threads and sizes on this
|
anyone? someone has to know this
|
I went out and looked at a bare Vic Jr. I had in the garage, but I had nothing to measure it with! I can tell you it's the same thread size as a standard heater hose barb (the one you thread into the water pump). I would go to the Edelbrock web site and look at the engineering drawings for that intake.
Bill Stradtner |
Not sure the exact size, both holes are the same size on my Victor Jr. intake.... for a "standard" mechanical gauge sender I had to get a brass adapter to size the hole smaller for the sending unit to screw into.....
David |
| All times are GMT -7. The time now is 03:08 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: