| Sinjin |
08-09-2009 07:57 PM |
Redundant Water Outlets
I have a Milodon H/c Pump on my stroked 351 W. I do not intend to fit a heater to the car so the two outlets/inlet on the pump need to be sealed.They are too close together to enable a return "U" with braided hose.
Someone must have a "neat" option for this.
|
| vector1 |
08-09-2009 08:05 PM |
drill and tap for an aluminum pipe plug.
|
| Rick Parker |
08-09-2009 11:30 PM |
Plug one and use the other to connect to the bypass hose back into the thermostat housing. It will assist in quick warm up when using a thermostat and in keeping consistant engine tempratures.
|
| Sinjin |
08-10-2009 03:15 PM |
Thanks Rick - perfect solution
|
| All times are GMT -7. The time now is 06:12 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
