|
Spf hard top camlocks
I have a hard top for my spf that i just bought but i do not have camlocks for the rear.I have them on order from hillbank,does anyone have pics showing them installed on the roof. I am just wondering how they hook up or install.
Thanks in advance |
I use 3.75 x .375" bolts with wingnuts on mine. Be sure and put a spacer such as a nut inbetween the top and the ferell on the car. The rubber seal should just sit on the car not crush flat. Also put masking tape or something under the rubber seal to keep it from scratching the paint.
Don |
painters blue tape also works as a deck protector - trim to not let the tape show if concerned about appearance . also, thin foam rubber type material works too to protect the paint from hardtop seal or soft top where the lift-a-dots are . Bill
|
I have been running the SPF hardtop for several years, and will take photos of my setup if you need to see them.
First question... Is it a SPF factory hardtop? Secondly, if so, has it already been fitted to your car by a SPF dealer? These are 2 important points we will need to know to be able to help you with your setup. The SPF hardtop "initial" install is best done by a dealer who has done it before. If not, I can help walk you through the setup process. Jim Kellogg Breesport, NY |
Hey Jim
Thank you for your reply,yes could you please take some pics of the camlocks in place.It is a spf hardtop.Your info would be greatly appreciated. |
| All times are GMT -7. The time now is 09:29 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: