Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   SPF Turn Signals (http://www.clubcobra.com/forums/superformance/106788-spf-turn-signals.html)

maxum_101 09-18-2010 07:30 AM
SPF Turn Signals
 
Hey all

my turn signals died on me.... with some help from fellow spf owners, I found it was that clear flasher thing under the dash, anyone have a part # so i can get one from Napa or some other parts place?

thanks in advance for the help

STEVE-O 09-18-2010 07:50 AM
Quote:
Originally Posted by maxum_101 (Post 1078932)
Hey all

my turn signals died on me.... with some help from fellow spf owners, I found it was that clear flasher thing under the dash, anyone have a part # so i can get one from Napa or some other parts place?

thanks in advance for the help
I dont have a specific part number but I belive its just the standard flasher. Just get one with the correct number of contacts.
When putting it in, loosen up the holding piece of metal a little bit so the pressure on the flasher isnt so tight.

Blas 09-18-2010 11:08 AM
Did you look on your copy of my Wiring Diagram?
All that type of information is there....

maxum_101 09-20-2010 10:29 AM
Quote:
Originally Posted by Blas (Post 1078947)
Did you look on your copy of my Wiring Diagram?
All that type of information is there....
hey Blas, u see i moved 4 mnths ago and well , let just say im still unpacking.... havnt found that box with the wiring diag, haha, but i did get it all fixed up and working, 1 question tho the one i took out of the car has a diffrent part number on it from the new one i bought from the store, does that make a diffrence? the new one works fine, but i just want to make sure.

maxum_101 09-20-2010 10:33 AM
Quote:
Originally Posted by STEVE-O (Post 1078933)
I dont have a specific part number but I belive its just the standard flasher. Just get one with the correct number of contacts.
When putting it in, loosen up the holding piece of metal a little bit so the pressure on the flasher isnt so tight.
hi Steve-O

thanks for your reply, it was the holding piece you mentioned that caused all the trouble, crushed the outter plastic case.

Marvin 09-28-2010 07:44 AM
The Superformance i just bought has no turn signals, what parts do i need to install them?
SPF # 2156

thanks, marvin

Blas 09-28-2010 08:38 AM
How can you not have turn signals? They were removed I assume?
Is the connector still at the base fo the steering column, just behind the dash face? Send me an email address and I'll send you a photo of the chassis plug to look for

PANAVIA 10-02-2010 04:15 AM
Classic -- I have had an issue when one bulb does bad the turn signal hangs and wont flash --

Marvin 10-02-2010 05:44 AM
Does anyone have a photo of the turn signal stalk?

I called the PO yesterday and he says never had turn signals?

thanks, marvin

Mark IV 10-02-2010 06:10 AM
Quote:
Originally Posted by Marvin (Post 1081410)
Does anyone have a photo of the turn signal stalk?
http://www.autohausaz.com/vw-auto-pa...placement.html

Note that the SPF uses a connector plug on the end that VW does not. The correct unit is the "1967" one.

Marvin 10-03-2010 05:42 AM
I have that 1967 i guess but it only operates the high beam.

The lever only has two positions it feels like, there is a clear part in tray under dash that looks like a flasher?

PO that bought the car new said never has had signals or at least they did not work?

Guess i need to check further see why the switch seems to only have two positions, also it is on the right of the column, is this correct?

thanks, marvin

Marvin 10-06-2010 03:46 PM
I removed the steering wheel today.

The snap ring that holds the signal stalk was just laying there loose.

Guess I need a drawing, I think someone has had this apart or it was not assembeled correctly.

When I removed the stalk the little contact with spring fell out, I'm not sure the collar that fits inside the stalk and over the steering shaft is oeiented correctly?

And I can understand why the snapring was not in place the left side of stalk collar lacks about 1/32 going down enough to get the ring installed.

Thanks for any advice, marvin

Blas 10-07-2010 05:22 AM
You never sent me that reminder message...Check your email

Marvin 10-07-2010 05:58 AM
Thanks for the reply, will need to wait untill i get time to remove wheel again and i will take photo's.

Not sure if everything is assembeled correctly, or even if all the parts are there.

thanks, marvin


All times are GMT -7. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: