- -
O-ring part number
(
http://www.clubcobra.com/forums/superformance/107156-o-ring-part-number.html)
| mark_n2 |
10-08-2010 08:07 AM |
O-ring part number
Anyone know the part number for the filler neck o-ring 427R/ 351W?
|
On what part? Dipstick? Fuel cap? Oil fill? 209
|
| mark_n2 |
10-08-2010 11:24 AM |
Sorry, thermostat housing
|
| PANAVIA |
10-12-2010 07:31 PM |
|
| mark_n2 |
10-13-2010 06:50 AM |
For whatever reason I cannot get an image to load on this thread. But if you go over to the small block talk forum, same question but has an image of the neck....
|
| rodneym |
10-13-2010 08:51 AM |
Don't water necks simply use a gasket?
It's a pretty standard size and should be available at the major part stores.
rodneym
|
| rodneym |
10-13-2010 01:32 PM |
mark_n2,
It looks I steered you wrong.
The stock 302 water necks use just a gasket but I've been told that the expansion tanks also have an o-ring. Sorry about that, my bad.
rodney
btw, the person who told me may or may not have a red and white stripe SPF, formerly known as RedBarchetta. %/
|
| PANAVIA |
10-13-2010 01:46 PM |
No problem, I was worried I missed a superformance product revision .( the Horror )
|
| ekrupa2 |
10-13-2010 04:00 PM |
The custom billet thermostat housing from Roush allows you to ditch the cheap stock version and uses an integrated O-Ring. There is no need for a gasket on the housing to spacer side. You still need a gasket on the spacer to manifold side. I beleive the o ring is just a round oring formed to the groove of the housing. I think with a touch of heat you can almost preform it in the groove or you could tack it in with a hint of permatex on install. I switched mine to the Roush housing when I replaced my intake gasket. High quality part and no leaks or drips.
http://www.clubcobra.com/photopost/d...um_Medium_.JPG |
| GEE TEE |
10-14-2010 04:01 PM |
Roush Thermostat Housing
Where can I get that nice billet thermostat housing. My Roush engine came with a cheap chrome thing that I can't seem to make leak free.
|
| ekrupa2 |
10-14-2010 07:27 PM |
My 402 SR came with the nice housing. I'd place a call into Roush and see if they can ship you one.
|
| All times are GMT -7. The time now is 07:46 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
