| Beemer |
02-15-2012 06:27 AM |
ignition switch assembly
My ignition switch assembly continues to loosens/turns clockwise when I start the car. I have held the assembly under the dashboard and hand tightened the knurled retainer around the key slot, but the problem comes back. I don't want to overtighten the knurled retainer in fear that it will cut into the dashboard covering creating more problems. I was thinking of installing a "comfort access" type of key ala BMW that you keep in your pocket with a push button starter that is activated when you sit in the car thus eliminating the ignition key starter. Experience/comments?
|
| xlr8or |
02-15-2012 08:40 AM |
Take the retainer off and drop the ignition switch out of the dash. There is usually an adjuster (nut) on the back that will allow you set the depth for the thickness of the dash. If that's too far in the outer will bottom out without it clamping down on the dash.
|
| Sailfish |
02-15-2012 02:26 PM |
My Superformance had the same issue when I purchased it. All I did was grab the channelocks, hold the switch behind the dash with one hand, and gently tighten the nut------being careful not to twist or curl the dash material----with the other hand. That was 3 1/2 years ago. Haven't experienced any further issues.
|
| Beemer |
02-17-2012 09:13 AM |
Thanks all.
|
| PANAVIA |
02-17-2012 12:28 PM |
you may want to also find a large gated washer to add traction back there. try not to use glue or anything like that -- that can really mess things up.
|
| All times are GMT -7. The time now is 08:56 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
