Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   Cobra Badge/427 emblems placement (http://www.clubcobra.com/forums/superformance/114703-cobra-badge-427-emblems-placement.html)

bnelsonod 03-08-2012 11:16 AM

Cobra Badge/427 emblems placement
 
http://www.clubcobra.com/forums/pict...d=7233&thumb=1 http://www.clubcobra.com/forums/pict...d=7240&thumb=1


I have had SPF #2099 for 4 days now and I love it!! I just wish the weather here would clear up and stop raining. I would like to add the front and rear Cobra badge and the 427 emblems to the side of the car. I have already ordered them from Finish Line. My question is what is the correct location. From pictures of other Cobras I see a lot of variation. I figured I would ask you guys where yours are positioned if you have them.

From the front lip of the car to the bottom of the "hood" or front badge?

From the top of the plate frame in rear to the bottom of rear badge?

And from the side louvers to bottom of 427 emblem?

Also I don't want to drill for the pins on the badges can I just mount them with 2 sided tape or will I need a different adhesive?

Thanks in advance

Ben

Mark IV 03-08-2012 11:54 AM

Do a search here as ERA has posted an excellent guide to the dimensions.

And remove the pins and use 3M moulding tape to affix them. Makes removal easy as some people don't want them as resale will not be hindered.

elmariachi 03-08-2012 12:42 PM

And the proper 3M product, lest you want to lose them going down the road, is called VHB (Very High Bond.) This is what the vehicle manufacturers use and will NOT come off.

bnelsonod 03-08-2012 12:54 PM

Thanks for the advice. I did do a search and found a good post from madmaxx about the variable location. I didn't find one from ERA but i will look again. It seems like most manufactures have different locations for their emblems. This does make sense since some have varying but similiar dimensions. And I have seen a wide range in locations. I just wanted mine to look "correct" for a SPF.

I will definitely get the VHB tape from 3M to hold them on.

SunDude 03-08-2012 01:05 PM

CLICK HERE to see the emblem placement instructions from ERA Replicas.

Blas 03-08-2012 02:04 PM

I have a Superformance Service tip on the issue..
(0208mt Badge Installation)
Drop me an email address offline and I'll send you a copy.


All times are GMT -7. The time now is 04:09 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: