Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   SPF Trim Questions (http://www.clubcobra.com/forums/superformance/121629-spf-trim-questions.html)

SPF2948 07-30-2013 07:07 PM
SPF Trim Questions
 
I've got a couple of issues with my new-to-me 2010 Mk. III that I'm hoping that you can help me with.

I removed the driver's side quick lift to install a registration plate bracket. I expected some sort of backer on the inside the fender but it appears that things are held in place with a pair of substantial machine bolts that the quick lift attaches to via a pair of acorn nuts. Unfortunately, the bolts are turning and I don't see much by way of access. Anyone found a way to tighten these two bolts without an impact wrench? Anyone know how to get to these bolt heads?

Finally, the driver's door latch needs adjustment and I'm wondering what my options are? Anyone else been through this?

Mark IV 07-30-2013 08:16 PM
Reach up into the fender area with a short wrench or socket. There is a nut on the thread rod in there.

Email me for door adjustment info rick(AT)timemachinesauto.com

SPF2948 07-31-2013 09:41 AM
I don't have a lift but I'll come up with something now that you've confirmed that they are accessible. From what I could see it appeared that they may have been covered by the flange on one of the two ducts that straddle those bolt heads. I have a good mental image of the area now and I think that the tool called for is a ratchet with a universal extension. Thanks!

Blas 07-31-2013 10:24 AM
If you send me your email address offline, I will send you a photo with the bolts identified that you need to access. My contact info is below.


All times are GMT -7. The time now is 11:47 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: