| vatdevil |
12-10-2013 03:22 PM |
Superformance Rear Differential Bushing
Anyone replace the rear differential rubber bushing with solid metal? I'm referring to the single rear bushing, not the two front bushings on the differential.
|
| D-CEL |
12-11-2013 09:21 AM |
Yes. But you have to run all three. If you run one solid bushing, it will take all the load.
My car has two aluminum front mounts and the housing bolts directly to the chassis. A side note, it does transmit considerably more noise into the chassis
JASON
|
| vatdevil |
12-11-2013 09:36 AM |
Quote:
Originally Posted by D-CEL
(Post 1275686)
Yes. But you have to run all three. If you run one solid bushing, it will take all the load.
My car has two aluminum front mounts and the housing bolts directly to the chassis. A side note, it does transmit considerably more noise into the chassis
JASON
|
Yes, I plan on installing front differential solid mounts also. Did you make a new rear bracket for the differential or modify the existing? Noise is fine, this wheel hop is not. |
| D-CEL |
12-11-2013 11:00 AM |
I don't know of anyone who sells a kit so you will have to make the rear or take it somewhere. Mine was made from a couple 90deg "L"s but the fab and welding sucks! I promised myself the next time I was under there Id cut it out and fab up something new to clean it all up. Some day...
And yes, It should eliminate your wheel hop completely, just make sure you maintain your driveline angles.
Jason
|
| eschaider |
12-12-2013 12:23 AM |
Quote:
Originally Posted by vatdevil
(Post 1275574)
Anyone replace the rear differential rubber bushing with solid metal? I'm referring to the single rear bushing, not the two front bushings on the differential.
|
Try these guys => Full Tilt Boogie Racing they have been providing IRS upgrades for the 03/04 SVT Cobra cars for a number of years. I believe their bushings are delrin not aluminum but they are quite effective. Nice drivetrain tech on the site also.
Ed |
| All times are GMT -7. The time now is 10:43 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
