Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   Clutch slave cylinder (http://www.clubcobra.com/forums/superformance/131601-clutch-slave-cylinder.html)

Tim7139 11-09-2014 06:32 PM

Clutch slave cylinder
 
Anybody recall what the dimensions of the NPT fitting is that screws into the slave, for the clutch hydrolic line?

Rick Parker 11-09-2014 06:48 PM

Most are 1/8" pipe

Tim7139 11-10-2014 09:30 AM

Thats one 1/2, what about the other half that the fitting screws on to?


All times are GMT -7. The time now is 05:31 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: