|
Sheared off bleed screw refreshing fluid
2 Attachment(s)
Last screw of last caliper (inner drivers front) twisted right in half when going to loosen the inner 1/4 bleed screw (housing sheared in half) seeing as i was one man pressure bleeding it made quite the mess...
On searching the inter-web i came across some photos of bleed assemblies broken the same way... Does anyone have a source for a replacement bleed assy (at least the outside)? Thanks SPO 1764 2003, four piston dual bleed calipers x 4 Attachment 26337 Attachment 26338 |
Deleted
|
This looks real close. Wilwood High-Performance Disc Brakes - Flexline No: 220-0627
|
You are looking for a 1/8" NPT brass bleeder assembly. Should be available in Weatherhead or Dorman product line, at your local parts store under $5.00. Wilwood also sells this as a repair part.
|
You might want to replace it with Dorman speed bleeders with thread sealant and an internal spring loaded valve. They make brake bleeding easier - especially if doing it yourself alone. I found them on the Dorman rack at Pep Boys so most similar auto stores may have them.
|
For everyone's info: Summit has them, but prior to install you need to run a 1/8" NPT tap into the hole. The broken piece was easily easy-outed...
Summit part no. 002-0627: http://www.summitracing.com/parts/wil-220-0627 $10.13 for four. |
Pegasus racing???
I get a lot of stuff from these guys - becasuse they have it. Tru |
| All times are GMT -7. The time now is 05:53 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: