| Brdslayr |
03-27-2016 08:13 PM |
Shoulder Harness upgrade
Looking to upgrade my car with shoulder harness. Only has the lap belts. SPO#2811. When going thru the wall behind the seat, is there one attaching point or two for the shoulder belts? Want to get it right the first time. I've seen both the double shoulder belt and one that goes over both shoulder and looks like a "Y".
|
| DWRAT |
03-27-2016 08:50 PM |
On my car there is one attachment point per seat.
Y harness in my car.
|
| Sawdust |
03-28-2016 03:16 AM |
On #1950 there is only one attachment point per seat
|
| jeffgrice |
03-28-2016 04:10 AM |
Quote:
Originally Posted by Brdslayr
(Post 1385925)
Looking to upgrade my car with shoulder harness. Only has the lap belts. SPO#2811. When going thru the wall behind the seat, is there one attaching point or two for the shoulder belts? Want to get it right the first time. I've seen both the double shoulder belt and one that goes over both shoulder and looks like a "Y".
|
The guys are correct - single bolt thru. There is a vertical piece of steel on the back side of the cockpit. Check it out with the car on a hoist. That is what you want to bolt thru. Be sure to measure both sides as the body could be a little off center when secured to the frame and since that is not a wide frame part you could miss center of it.
I used a marine grade eye bolt with fender washers.
Jeff |
I can send you directions for installing the "Y" shoulder harnesses. Going to 2 belt connections will take modifications or the addition of a crossbar on the hoop. My email is below.
|
| Brdslayr |
03-28-2016 08:39 PM |
I'll take any info I can get and appreciate it. My email is brdslayr@charter.net Hopefully I can find a part number and just buy the shoulder part of the harness. |
| Sawdust |
03-29-2016 04:09 AM |
I got my shoulder harness from DJ Safety Inc. I believe the part number was "330300" which is a 3" "Y" black style harness. Give them a call
|
Install info sent.........
|
| zedog |
03-30-2016 10:11 AM |
DJ sells them without their logo too, just have to ask.
|
| Tim7139 |
03-30-2016 12:18 PM |
Quote:
Originally Posted by Brdslayr
(Post 1386045)
I'll take any info I can get and appreciate it. My email is brdslayr@charter.net Hopefully I can find a part number and just buy the shoulder part of the harness.
|
When you get the ass end up and wheels off, you can see the hole in the frame and locate the slot in the bulkhead behind the carpet. Slit that with an exacto knife.
You want a harness set with a single metal bracket, which you bolt up through the cross member. i think I used a grade 10 5/16" bolt and large washers with a lock nut. Takes about 10 minutes a side.
Did mine the same time I installed the shock mount upgrade, last summer. |
| All times are GMT -7. The time now is 09:45 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
