Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   Fuel Filter (http://www.clubcobra.com/forums/superformance/138410-fuel-filter.html)

zzmac 05-02-2017 01:50 PM
Fuel Filter
 
1 Attachment(s)
A new fuel filter is long overdue. Does anyone have a part# for this one or know where to buy a replacement (preferably in Canada)?
If something better is recommended I'd prefer something not requiring changing the hoses, if at all possible. Thx!!

Mark IV 05-02-2017 05:33 PM
Basic 3/8" inlet/outlet filter. Any NAPA, try these numbers:
https://www.napaonline.com/en/p/BK_7309562
https://www.napaonline.com/en/p/BK_6101687
https://www.napaonline.com/en/p/BK_7355235

zzmac 05-02-2017 05:36 PM
Thanks!

Sawdust 05-03-2017 02:26 AM
zzmac
Napa Canada part number NGF 3032

zzmac 05-03-2017 04:30 AM
Thanks Sawdust!

cycleguy55 05-04-2017 10:15 AM
Quote:
Originally Posted by Sawdust (Post 1421161)
zzmac
Napa Canada part number NGF 3032
That one shows inlet / outlet sizes as 5/16". This one is 3/8": https://www.napacanada.com/en/p/BKB7355235

zzmac 05-05-2017 05:33 AM
Quote:
Originally Posted by cycleguy55 (Post 1421182)
That one shows inlet / outlet sizes as 5/16". This one is 3/8": https://www.napacanada.com/en/p/BKB7355235
That filter is probably correct but I ended up going with Napa Gold Filter #3033 https://www.napacanada.com/en/p/NGF3033

But a funny thing happened on the way to the NAPA store....... The night before I read the first two responses and then the next day I came back to the clubcobra site to write the part# down but the website wasn't working all day. So I drove over to NAPA, showed them a picture of my filter and when he asked what size......I said 3/8 because that's all I remembered from the posts. So he then proceeded to sell me Part #3032.
It came with two small pieces of hose and in each one I stuffed a bolt so I could use them as gas stoppers. I pulled the hose off one end of the old filter and when I tried to jimmy the gas stopper on of course it wouldn't fit because it was 5/16! I had an oil catcher close by and I just decided to let all the gas drain out. When you don't have a lot of room to work with and you're getting spashed in the face with gas you don't have a lot of time to make decisions. So an oil catcher, and some pots and pails later I no longer had to worry about my gas stoppers. When I got the older filter off it was easy to see the problem. $11 filter. $50 gas. Problem solved! :LOL:


All times are GMT -7. The time now is 10:36 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: