| Detroit Bill |
09-04-2020 02:56 PM |
Mounting the master cylinder reservoir remotly
I am having issues with the master cylinder reservoir leaking out the rubber bungs. I would like to mount the reservoir on the bulkhead. Does anyone know of a kit to do that? I tried Dennis Olthoff a couple time and he promises but never comes up with the parts.
|
| cwg427 |
09-04-2020 03:47 PM |
Wilwood makes a kit, I Got mine from speedway motors part# 835-26010500, I also needed Wilwood master cylinder inlet remote adapter part # 260-3396. Did not end up putting them on but looked liked they would work.
|
| Dwight |
09-04-2020 04:14 PM |
I have a box full of Wilwood parts. I have the adapter and it's new. I'll look tomorrow but I think I have the reservoir kit new. I'll take pictures.
If y'all will pay the postage I'll mail them to you.
Several guys on the forum have helped me in the past. I can past it on.
Thanks
Dwight
|
| incoming |
09-04-2020 07:14 PM |
Do a search on steelsoldiers.com. Its a very common upgrade on deuces.
|
| Sawdust |
09-05-2020 07:45 AM |
Quote:
Originally Posted by Detroit Bill
(Post 1482184)
I am having issues with the master cylinder reservoir leaking out the rubber bungs. I would like to mount the reservoir on the bulkhead. Does anyone know of a kit to do that? I tried Dennis Olthoff a couple time and he promises but never comes up with the parts.
|
Bill,
I thought Kirkham has a reservoir kit. |
| Dwight |
09-06-2020 07:14 AM |
I tried to post pictures but the files are to large.
I think I have what you need
If you PM me I'll get you a picture
|
| Detroit Bill |
09-08-2020 07:42 AM |
They do
Quote:
Originally Posted by Sawdust
(Post 1482203)
Bill,
I thought Kirkham has a reservoir kit.
|
They do but I thought it is just the Reservoir itself, not the hose and rubber bungs for the master cylinder. The bungs and holes are the real problem.
The bungs look like a crappy design to me. |
| Sawdust |
09-09-2020 02:15 PM |
Quote:
Originally Posted by Detroit Bill
(Post 1482315)
They do but I thought it is just the Reservoir itself, not the hose and rubber bungs for the master cylinder. The bungs and holes are the real problem.
The bungs look like a crappy design to me.
|
Try Rick Muck at Time Machines Motorsports.
www.timemachineauto.com |
| All times are GMT -7. The time now is 11:20 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
