| TN Shelby Cobra |
11-05-2022 01:03 PM |
Blinker, hi-beam lever question?
Anyone know the part number or where to get info for the hi-beam blinker switch and the headlight switch? I know you can get several of the parts at NAPA. The car is a Mark III Superformance # 1399 Thanks, Mark
|
| NROTOXIN |
11-05-2022 02:38 PM |
Turn Signal Switch JOPEX 8196200800
They're everywhere on the web at various prices.
|
Before replacing that part, what is the problem exactly you are having?
Blas
|
| Mark IV |
11-06-2022 03:02 AM |
Quote:
Originally Posted by NROTOXIN
(Post 1511806)
Turn Signal Switch JOPEX 8196200800
They're everywhere on the web at various prices.
|
There are several manufacturers of this switch, some are outright junk, others are pretty good. We have found a supplier that has a unit that we feel is better than the Superformance factory supplied switch. |
| tortuga |
11-06-2022 11:09 AM |
Its a VW bug unit.
As blas asked what is the issue...I just went through this whole evolution...
Steve H
1764
|
| NROTOXIN |
11-06-2022 11:52 AM |
Quote:
Originally Posted by Mark IV
(Post 1511814)
There are several manufacturers of this switch, some are outright junk, others are pretty good. We have found a supplier that has a unit that we feel is better than the Superformance factory supplied switch.
|
Is the JOPEX junk? Is it the one supplied by the factory? |
| twobjshelbys |
11-06-2022 12:04 PM |
It's just off a 60's VW bug. What magic floobie dust would make any one better than any other?
|
I’m still waiting to hear what the actual issue is.
Blas
|
| Mark IV |
11-06-2022 11:47 PM |
Quote:
Originally Posted by twobjshelbys
(Post 1511834)
It's just off a 60's VW bug. What magic floobie dust would make any one better than any other?
|
Like being one that doesn't fall apart when used? That doesn't have the hi beam switch lock-up? That magic floobie dust........
Not personally familiar with the JOPEX. The factory switch is decent but there are better ones available up to a $350 plus "super repro" VW switch. |
| robz_hayman |
11-08-2022 05:06 PM |
To jump on this forum. I also am looking to replace the turn signal lever.
My specific issue is the switch on the back of the stock itself has broken off and the relay inside of it is stuck in the ON position. Not too bad since I don't drive at night but definitely want to fix this with an OEM or better part.
|
Robz,
You have a message
Blas
|
| Michaelanezinis |
11-28-2022 07:07 PM |
My issue:
When signaling to turn left, I must hold the blinker lever in position
Any suggestions on how to correct?
|
| Mark IV |
11-29-2022 03:33 AM |
Quote:
Originally Posted by Michaelanezinis
(Post 1512417)
My issue:
When signaling to turn left, I must hold the blinker lever in position
Any suggestions on how to correct?
|
What make is your car? If Superformance we can supply instructions on the repair. |
Sounds like it might be the internal cancel cam mechanism that needs an adjustment.
Send me a message or email and i can get the procedure to you.
Blas
|
| Michaelanezinis |
12-01-2022 05:21 PM |
Quote:
Originally Posted by Mark IV
(Post 1512423)
What make is your car? If Superformance we can supply instructions on the repair.
|
It’s a Superformance |
| Mark IV |
12-02-2022 02:40 AM |
Quote:
Originally Posted by Michaelanezinis
(Post 1512509)
It’s a Superformance
|
PM me for the information |
| TN Shelby Cobra |
12-13-2022 02:03 PM |
Thanks guys. The clicker on the blinker switch was sticking bad. Got a new one. Everything is ok! Mark
|
| 2Torqued |
03-07-2023 08:28 AM |
My high beam low beam switch is stuck in. Can I pull it apart and fix it or should I just replace it?
|
| redvettx2 |
03-07-2023 08:51 AM |
We have a high beam switch, lol.
|
| All times are GMT -7. The time now is 09:57 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
