Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   Remote oil filter housing (http://www.clubcobra.com/forums/superformance/147104-remote-oil-filter-housing.html)

Davidless 07-26-2023 02:31 PM
Remote oil filter housing
 
Hi All,

Another dumb question for you guys but a necessary one for me.
I'm running an 12AN hose from my block oil adapter to the SF remote filter housing. My question is will the remote oil filter housing inlet ports allow for a 12AN fitting? They look very close together from the pictures that I was able to find and since the fittings are vary large they may interfere with one another. I'm guessing the ports are 1/2" NTP similar to the block adapter.

Thanks the help

eschaider 07-26-2023 03:15 PM
Probably are, but that doesn't matter. Just get a -12 AN to 1/2 inch NPT adapter. Summit has them in stock. Should work fine.

cycleguy55 07-27-2023 12:33 PM
Yup, Summit Racing has 98 -12 to 1/2" NPT adapters listed - straight, 45° and 90°. Using a 45° could provide additional room for -12 fittings if that's necessary.

https://static.summitracing.com/glob...3-bl_vg_xl.jpg

https://www.summitracing.com/search/...0NPT%20adapter

eschaider 07-27-2023 02:10 PM
Where possible, try to use a straight adapter with streamline fittings instead of the drilled, forged fittings. The flow difference is significant.

Davidless 07-27-2023 05:21 PM
Quote:
Originally Posted by eschaider (Post 1518869)
Where possible, try to use a straight adapter with streamline fittings instead of the drilled, forged fittings. The flow difference is significant.
Yes I am


All times are GMT -7. The time now is 05:46 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: