Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Superformance (http://www.clubcobra.com/forums/superformance/)
-   -   Battery hold-down (http://www.clubcobra.com/forums/superformance/147410-battery-hold-down.html)

jwshira 11-05-2023 01:44 PM

Battery hold-down
 
Came back from a ride, and found that I had the battery compartment lid and the two knurled knobs that fasten it, but nothing else. Whatever sort of threaded rods that were there have apparently fallen free and are somewhere out on the road. Never paid too much (any) attention to just exactly what was there, so I don't know what to replace. Can anyone tell me what the stock SPF battery compartment lid hold-down is comprised of? Just two threaded rods, or something more complex? Pictures would be greatly appreciated.

Blas 11-05-2023 06:07 PM

Look to see if the 2 rods just fell into the battery box.
I don’t recall them projecting thru the box but that’s a detail I have never really looked closely at. I can tell you the rods on mine remain upright when the battery is removed, that I know for sure.
Blas

jwshira 11-05-2023 08:48 PM

Nothing in the box but the battery. There are two holes in the bottom of the box that align with the holes in the cover, so I assume the rods went through the bottom of the box and were secured somehow.
Hoping someone can provide some insight on what the factory setup is.

twobjshelbys 11-05-2023 08:58 PM

Mine were not full threaded. Straight ods had a short right angle turn at the end to hold them in place and threaded on the other end

Blas 11-06-2023 04:25 PM

Ok, mine has a 1” wide plate the length of the battery box bonded on the outside bottom of the battery box. I would guess two pieces of round rod are tacked to the 1” plate and project up thru the fiberglass and into the battery box. They would be threaded at the top for the knurl nuts to secure the cover. Send me an email message and I’ll take a photograph for you. Appears easy enough to fabricate something. What is your chassis number? Odd that the bonding would fail unless mounting bracket was removed by previous owner to fit off spec battery?
Blas


All times are GMT -7. The time now is 07:23 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: