-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
| vector1 |
02-24-2011 09:59 AM |
making own gasket material info
just a fyi, i'm replacing an intake manifold and didn't want to order a gasket (i like the cometics except the $) so i went down to napa and they have gasket material to sell by the roll. the thickest they had was 1/16" made of rubber/fiber 10" x 26" part number 3187 which is approx. the same thickness as the cometics if i remember correctly. only $7:D
|
| ERA Chas |
02-24-2011 01:06 PM |
Be careful what you buy is not affected by glycol coolant.
|
| vector1 |
02-24-2011 04:50 PM |
good point! the material looks like the cometic stuff and i guess i could call fel pro but i might do a soak test.
|
| All times are GMT -7. The time now is 12:40 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
