|
Jaguar Differential - Pinion Yoke
Guys
Looking for a pinion yoke for a Jag Diffy................ Want to sell one? Second, What is the measurment from the base of the yoke where it attaches to the diffy to the center of the U-Joint? Thanks |
What spline count do you need? I have a couple for original Jag gears.
|
Hey Jeff I think you need the flange yoke as in the back end of the drive shaft??
|
Sorry guys Flange Yoke........... Driveshaft connection............
What part # do you know............ |
Coventry West has those in stock most of the time.
Bob |
No luck
|
i have some here in the uk if you want to pay the postage.
|
Still confused (actually I stay that way...); is this what you're looking for: 1310 Series Flange Yoke for Jaguar Dana 44 Rear Differential
Or might it be the topmost piece in this diagram: http://bernardembden.com/xjs/diff/1diffx.jpg Tom |
Spicer 2-2-459 1310 Flange Yoke
Tom, you have pictured the mating part, called a pinion flange. Your URL leads to a generic flange yoke that will probably work.
I bought mine per the ERA Manual, and they specify the Spicer branded part as it is proven, strength-wise. See: Spicer 2-2-459 1310 Flange Or google: "Spicer 2-2-459" ... lot's of sources. I can testify that it is good for 614 ft-lbs TQ ;) The stub axles will break first ... don't ask :rolleyes: The OP also needs the specific bolts and locking nuts, if he does not have them. The dims are here: http://www2.dana.com/pdf/J300-P2.pdf Sam |
Thanks guys.........................
|
|
Thanks
I needed the flange yoke.... Thank you all for the help, now we are all set Bottom of page: http://www.clubcobra.com/forums/scra...ogress-41.html |
| All times are GMT -7. The time now is 12:43 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: