|
Terlingua Racing Stripe...
Hey Folks,
I don't post much, but I use Forums to find knowledge and experience. However, I am stuck. Where can I find the Terlingua Racing stripe schematics/dimensions? I have looked everywhere and Googled the crap out of this. Any thoughts or ideas. Thanks for your time! Dan |
When I ordered my SPF back in 2004, I wanted the yellow Terlingua stripe across the nose. The factory had never done one and asked for the specs. I couldn't find anything so I used a picture from the famous artist and friend of Shelby, Bill Neale. I used that picture and then did a bunch of measuring and came up with a 4" stripe, 1" below the front hood opening, and gave those specs to the factory. You can see how it turned in my avatar pic. I was pleased with the outcome. Hope that helps.
:3DSMILE::3DSMILE::3DSMILE: |
Thanks for the quick response JWoodard,
Are the Terlingua stripe identical to the 289 F.I.A.? One or 2 of our club members live nearby, I can get measurements off of their cars. I have a factory five and kept it in gel coat black for a few years and added a front nose stripe that looks a little like it but ain't close enough! I like the look and it's different from the usual style. Thanks for the help with some of the dimensions. I like the avatar, the car looks fantastic! Dan |
1 Attachment(s)
here's what it looks like now. It's torn down right now and getting ready to go to the painters.
|
I don't know if they are the same dimensions or not, but here's what I suggest.
Layout a sample stripe on your car with some painters tape and experiment with the size and location until you get what looks good to you. I wouldn't be too hung up on it being exact to any Terlingua or FIA 289 standards, if there any. No one would know the difference anyway. The stripe you currently have looks to be a bit wider than 4". :3DSMILE::3DSMILE::3DSMILE: |
OH, MY STRIPE IS WAY OFF THE MEASUREMENTS!
I'll get with the painter and hopefully have a set design well in hand by then. Thanks! Dan |
I think the ‘Terlingua Cobra’ was a dealer scheme/edition for Shelby’s tribute cars… so you’re actually replicating a replica. The best source for correct color and dimensions would be to locate one of the original replicas… or find photos of them.
|
As Ron said above, there was no period "Terlingua Cobra"....the "Terlingua" cars were Mustangs!
Ron researched his FIA nose stripe in detail before he ordered his Superformance FIA from us so I would trust his dimensions if you want to replicate the FIA nose stripes. |
Thanks guys for all the info and knowledge. I will use them.
|
| All times are GMT -7. The time now is 04:19 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: