Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Tech Tips (http://www.clubcobra.com/forums/tech-tips/)
-   -   Spicer 1410 half shafts on Amazon (http://www.clubcobra.com/forums/tech-tips/132431-spicer-1410-half-shafts-amazon.html)

David Kirkham 02-16-2015 03:31 PM

Those look great!

ScratchBuilder 02-17-2015 01:42 PM

Thanks David!! More to come.:D

ScratchBuilder 06-21-2016 04:30 PM

Time to press in u joints:
http://www.clubcobra.com/forums/pict...ictureid=15539

ScratchBuilder 06-21-2016 04:32 PM

One down, one to go! This was a fun parts project, the first joint took a little extra effort but the rest of it went together smoothly:
http://www.clubcobra.com/forums/pict...ictureid=15540

ScratchBuilder 08-04-2017 10:03 AM

Finally installed:)
http://www.clubcobra.com/forums/pict...ictureid=16906

Mongoose930 08-04-2017 10:50 AM

Looks awesome. Keep the pictures coming!!!

Cobra #3170 08-04-2017 11:04 AM

Original Hardy Spicer Flanges were round not rectangular. I would only buy drive line parts from David Kirkham. They are perfect material and jewel like in finish and accuracy and THEY DON'T BREAK!

LMH 08-04-2017 02:32 PM

Nice!
Larry

my427cobra 08-06-2017 09:03 AM

Hi Scratch Builder and David Kirkham:

What is the "nominal" (normal operational) fully extended and fully compressed flange to flange length of this Spicer half shaft assembly?

Just curious.

Cheers
Greg


All times are GMT -7. The time now is 09:00 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: