|
Lincoln Versailles brakes
I have a 9” Versailles rear with disc brakes and would like to swap the cast iron caliper for an aluminum one with E brake, it’s mostly street driven. Do you know of any that would bolt up or even a little fabrication. Thanks
|
Check with Wilwood or Baer. I'm sure they have just what you are looking for.
|
Gene,
One of these might do: https://www.speedwaymotors.com/shop/...2-55-713-3-495 One of the complications may be the emergency brake. You might do better by calling them or maybe Summit. Or if money's not a problem: https://www.wilwood.com/BrakeKits/Br...%20Brake%20Kit perhaps one of these will work ;-) Tom |
Quote:
https://www.wilwood.com/Images/Brake...6142-DR-sm.jpg https://www.wilwood.com/BrakeKits/Br...o=140-16150-DR Wilwood also has mechanical parking brakes. https://www.wilwood.com/Calipers/Cal...4%20Mechanical |
Speedmaster has an aluminum caliper setup with integral parking brake. Single 1.75" piston. Fits 11" rotors (not included). Fits Ford 9" rear end with "small ends" (Torino). I have no idea whether that's what you have, but you should be able to figure it out with a few measurements.
https://www.speedmaster79.com/BRAKE-CALIPERS https://product-arena.s3.us-west-1.a...CE521.1021.JPG Speedmaster also offers a "Ford Late Model Large & Small Bearing 4 Piston 12" Rear Brake Kit". Aluminum calipers and mechanical drum parking brakes. Drilled and slotted rotors. https://www.speedmaster79.com/Ford-L...Rear-Brake-Kit https://d2c5keh8asbas7.cloudfront.ne...CE164.1015.jpg |
| All times are GMT -7. The time now is 06:44 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: