|
first cut
PETEK--HI GUY --DID MY FIRST CUT ON THE BODY LAST NITE MADE THE MISTAKE OF DOING THE NOSE. PUT GOUGE IN SIDE AND THE BOTTOM CUT IS AS WAVEY AS MY LAKE. WHAT DO I NEED TO FIX GOUGE? AND HOW DO I STRIGHTEN OUT LOWER WAVEY INSIDE LIP ? THANKS DCAPO
|
What kind of cut?
I assume you are cutting out your headlights, side pipes, or something like that and your body has not been painted.
If your cut is "wavey" and it will show on your lights then sand both sides of your headlight area to be repaired and get some resin and fiberglass cloth and build up the area needed . After applying 3 or 4 applications of resin and cloth you will need to sand everything to the shape you want. Be sure and wear a mask and long sleves while working with fiberglass. If your side pipe cut is wavey then lay out a straight line along your wavey cut.Use masking tape or striping tape (3M plastice green or blue tape), then get a hand file, rasp, or die grinder and clean up your cut. If you're gouge in your panel is not through the skin then sand it out with 80 grit sand paper and use some bondo to fill in the gouge then block sand it. If your gouge is all the way through the skin, sand all sides with course sand paper and grab the fiberglass and resin. Be sure and block sand all your repair areas starting with 80 grit wet or dry and finishing with 400 grit wet or dry. Also, use a contrasting color to find the high and low spots of your work. Good luck. |
Dcapo,
Clois nailed it. Remember, until the car has been painted, any body damage inflicted can be easily fixed with fiberglass, resin, or bondo. |
| All times are GMT -7. The time now is 05:50 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: