|
Shell Valley Frt Tubulars w/Frt Sway Bar
Has any installed Shell Valley's front tubular A-Arms that is running a front sway bar? If so did you have to make another bracket for your sway bar or does Shell Valley have one that we can buy?
Thanks, Clois |
I Just talked to one of the guys at Shell Valley and he tells me they don't use a sway bar on their set ups. However, I could mount my brackets for my sway bar on top of the tubes and adjust my spacer on my mounting hardware.
I think I will make a bracket from 1 1/2" wide 1/4" flat stock and put about a 10 degree bend it to get the proper angle so I won't have to modify the position of my sway bar. |
Finished
Wrapped up the install and manufacture of frt sway bar brackets and everthing works great. Each bracket took about 15 minutes to layout and drill. I used 1 1/2" X 1/4" flat stock and extended my brackets 1" over the stock bracket. Works great and fits great too. Maybe it is just my imagination but my Cobra seems to handle much better than before (after a good alignment of course).
To convert the front suspension from stamped to tubular took me about 4 hours (including the mfg of sway bar brackets and a trip to PEP Boys for a pair of 1/2" X6" long bolts for my coil overs). Easy job. Clois |
| All times are GMT -7. The time now is 09:42 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: