|
Ulf - the needle valves I fitted were just the "bigger" type. I might try the "off road" ones next.
Dirty Harry - I got no help from Edlebrock tech support, they just told me my float levels were wrong, which is not the case. Oh well. Glad you got your answer tho'. Wilf |
I had the same experience with Edelbrock tech-line, a quick reply, but only with the same answer as in the manual...... I can guess that we would be more surprised if the answer was: "Ohhh yeah, there is a slight design flaw there"
My testing is cancelled, snow, ice and mud wont give me the abrupt sideways accelerations I look for! Ulf |
| All times are GMT -7. The time now is 04:37 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: