|
Cam Installation Tool
Guess what,.... I found that the side handle that came with my Ryobi 4" Grinder threaded perfectly into the hole of my SB Ford Cam. I used this to remove my old cam and to install the new Comp Cam. This was perfect for not banging up the cam bearings.
On the install, I threaded the handle in (but not completely tight) and slid the cam right in. Worked Great. Once the cam was in all the way, I gave a quick snap of the wrist (Think Foosball, here)... and the handle came back off perfectly....... RZ |
Great idea. I wonder if my DeWalt cam installation tool will work as well?
Bill Stradtner |
| All times are GMT -7. The time now is 03:01 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: