-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
- -
hydralic slave
(
http://www.clubcobra.com/forums/tech-tips/46961-hydralic-slave.html)
| mikevail |
11-06-2003 06:37 PM |
hydralic slave
I've a Shell Valley cobra with the clutch & brake pedals mounted to the frame.The guy I got it from said the master and slave cly. are from a 62 Chevy truck.I'm in the process of hopping up the engine and changing to a T-5.The trans. that was in the car is a SROD 4-speed and the clutch took appox. 75 lbs. of foot pressure to disengage.(no joke). Since I have to make a new bracket to mount the slave cly. to the gearbox I was wondering if there is a better master-slave cyl. combo that would be less stressful to my left leg-foot combo.:LOL:
|
| cannonball |
11-07-2003 05:54 PM |
try johnsmustangs.com
|
| Back in Black |
11-07-2003 07:22 PM |
Contact Tilton
|
| Cal Metal |
11-10-2003 10:05 AM |
Any major auto parts store, such as NAPA, can sell you a unit that works on Ford bellhousings for around $35.00. Check EIS or Raybestos.
|
| Bluesman |
11-11-2003 05:27 PM |
Being that the tranny is being changed out, you might check out the McCleod HTOB (hydraulic thow-out bearing). It eliminates the need for a slave cylinder. No fork is needed. It is pretty expensive but worth it. All it is, is a line that goes from the master cylinder to inside the bell housing and pushes a piston that travels the throw-out bearing. Very easy to install.
|
| Cal Metal |
11-12-2003 08:06 AM |
For those contemplating using a internal hydraulic TOB, you may want to do a search on CC regarding the pros and cons. This topic has come up on a number of occasions and the responses of people using them is worth the search.
|
| Cal Metal |
11-19-2003 08:13 AM |
The Raybetos Slave Cylinder number is SC 33721
|
| TCR_BRIAN |
11-19-2003 08:54 AM |
JMC Slave Setup
1 Attachment(s)
Hey Mike,
Team-C-Racing is a distributor of JMC parts I can get you a slave setup for a T5..or Tremec if needed..drop me an email with your zipcode and I can give you a price with shipping..... info@teamcracing.com
Thanks,
Brian
www.teamcracing.com |
| All times are GMT -7. The time now is 11:49 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
