|
Traded and got a CMC Cobra kit !!!
I'm new to this so bare with me . First off I love this cobra kit and need a little imput .Im big into rat rod model a 's and dont mind gettin durty.
This kit has no manual and I have searched club cobra for one .Not that I think its needed or anything but its got lots a brackets that I have know idea what they are.Im going to try and get a pic or to up and hope I get some input .First thing I did was get the body off. I got a mustang II front end and a rear end out of a mustang 5.0 lx .Hope to get it on all fours this weekend. I had a componant craft cobra kit car years ago but traded it the day I got it for a 32 ford .I wished for another cobra later.I hope this one gets me going. Thanks Cobras Mitchfab |
Have you contacted Street Beasts (the old CMC) in Florida. Maybe they would be nice and send or email you the assy. manual.
Kit Car at www.streetbeasts.com: Street Rods, Street Rods For Sale, Replica Kit Car, Classic Hot Rods, Home Good Luck....... John |
Send me some pics of the brackets, and I can tell you what is what.
|
Got a manual for 50 from the Beast!
Should be here tomorrow .
|
Mitch,
Sorry I didn't see this sooner....I would have sent you a copy for postage..if you need anything else let me know .....I'm about 4 1/2 years into my build and know a few of the guys at Streetbeast....you have to stay on top of things with them.......Earl |
Got a posi out of a couger wednesday and stuck it in my frame.Fixing to drill axels for a 5on 4.5,Got to set of large drums off a 9 inch small barring that might fit . I was looking on the Cobra Club for cad drawings and such for wheel offsets ,I cant seem to find any. Do I have to be a member to get them?
|
I doubt you will find any CAD drawings on Club Cobra for wheel offset. You can find plenty of discussion, if you do a search on wheel offset.
I have a Street Beasts with a Strange 9" with shocks and coil spring set-up, like a mustang. The max offset I can run with this is 4.5". You can go to places like tirerack.com and they explain wheel offset. In a nutshell, measure from the face of your axle to the nearest thing your tire will touch (frame, shock, spring) and that's the max you can go in that direction. It really depends how wide of a tire you plan to run and how much you can stuff under the car. Good Luck! :JEKYLHYDE |
| All times are GMT -7. The time now is 08:00 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: