-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
CMC Cobra brake line routing to rear brakes
I'm in the process of plumbing the rear brake lines on my CMC cobra and was wondering how others have routed the lines from proportioning valve back? I didn't really want to run a line in the drive shaft tunnel but it looks like other than that I'd have to run thru the frame bulk-head fittings. Any pics or suggestions would be appreciated. Don
|
| xlr8or |
01-13-2009 11:27 PM |
The tunnel should be fine. Just don't let it hang below the frame rail where it can get damaged. Would hate to lose the breaks if it got hit on a bump or object going under the car.
With a solid axle you can run it back and use a flex line to the axle and split it there or split before the axle and use flex lines on each side.
|
| All times are GMT -7. The time now is 09:33 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
