-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
| Chaplain |
03-13-2009 02:31 PM |
Front Suspension Help
My current front suspension is the stock stamped style Mustang II type. I want to convert it to the tubular coil-over type. Are there other companies than Heidt's and RCC Specialty Products that produce components? Any advice is appreciated.
|
| mr bruce |
03-13-2009 03:19 PM |
|
| rustyBob |
03-16-2009 08:32 PM |
Speedway in Lincoln Nebraska has a good selection or try any of the street rod shops they can hook you up.
|
i used the heidts along with their wilwood brake kit. tubular with coil overs. i'm really happy with their stuff. if you would like to see it, feel it, taste it, i'm in pa stop by anytime
|
| All times are GMT -7. The time now is 04:23 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
