-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
| Rick Parker |
05-02-2009 11:49 AM |
Unusual Stainless wire clamping tool
|
| Randy Rosenberg |
05-02-2009 11:56 AM |
Very simple, yet very effective.
|
| 427 S/O |
05-02-2009 01:46 PM |
As a tool junkie..........
Thanks.
|
| Seagull81 |
05-03-2009 08:39 AM |
Crap, something else to buy!
|
| race-it |
05-03-2009 08:52 AM |
I have three sizes and I like the tools. I use a lot of clamps in my business and this tool works good but use good SS wire. Regular clamps you tighten with screwdriver or nut driver seem to snap before they tighten up. This tool won't replace using regular clamps especially in tight places but it is a good tool that can be used on any size pipe. The best solution is to find a manufacture that produces a strong screw clamp!!!!!!!!!!!! I should not complain when I buy 10 clamps at Harbor Freight for a dollar and only three work.
|
| 427 S/O |
05-03-2009 09:11 AM |
I never understood why folks buy tools from Harbor Freight..AKA, china outlet. The prices alone tell you where they came from!. Yes, I have been down that 'china road', best short term education there is.
|
| Michael C Henry |
07-10-2009 09:31 PM |
I bought a couple of those kits at the Puyallup Wa. State Fair a couple of years ago. I put a kit in the trunk in the emergency tool kit.
|
| lbperry |
07-10-2009 10:13 PM |
Do these things work well enough to trust them as radiator hose clamps, etc?
|
| Michael C Henry |
07-10-2009 10:30 PM |
If installed correctly and you don't pull so tight that you cut into the hose it will probably last longer than you need it to.
|
| All times are GMT -7. The time now is 09:42 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
