-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
- -
Wiring ??
(
http://www.clubcobra.com/forums/tech-tips/97649-wiring.html)
| WildBill3 |
06-15-2009 06:15 PM |
Wiring ??
Ok I was putting in a grommet through the firewall for the MSD box .I also cut the wires for the box and was thinking of putting in conectors so we could unhook the MSD ,but not wanting to create alot of resistance in the wire sodering the ends and soforth is ther anything I should be watching for or is this a bad idea? Or Should I just resoder the wires and go with that?
|
i would make it disconnectable. any afterthought welding will require it to be disconnected, and for ease of changing it incase of failure.
fred
|
| WildBill3 |
06-16-2009 04:10 PM |
Has anyone else done this did you get a multiwire plug? or just put several different connecters on?
|
| elmariachi |
06-18-2009 10:19 AM |
I was thinking about finding a nice Molex plug, but hadn't gotten around to it yet. Post up what you find and decide to do. I would hope that the MSD isn't too fickle to function with a well-prepared plug in the wiring.
|
| All times are GMT -7. The time now is 01:14 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
