Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Texas Cobra Club (http://www.clubcobra.com/forums/texas-cobra-club/)
-   -   D/FW Area - Need Headers Coated (http://www.clubcobra.com/forums/texas-cobra-club/129291-d-fw-area-need-headers-coated.html)

dallas_ 06-12-2014 06:39 PM
D/FW Area - Need Headers Coated
 
Any recommendations on a local shop that can coat a set of headers?

Ceramic, Nitroplate, Jet-Hot. Will consider any and all.

Thanks! :)

John

SSSammy 06-12-2014 07:42 PM
Jet Hot
 
Jet Hot in OKC. You can box them up and ship them. I'm guessing about $350 to coat. They give a lifetime guarantee, and it doesn't matter how they got damaged. I have had mine done twice. And I carried my side pipes up there to save having to make boxes. Nice people. Tip: the polished silver ceramic (aluminum) finish oxidizes and turns dull after a few months.

Sam

MRGEORGE077 06-12-2014 07:58 PM
Quote:
Originally Posted by SSSammy (Post 1305870)
Jet Hot in OKC. You can box them up and ship them. I'm guessing about $350 to coat. They give a lifetime guarantee, and it doesn't matter how they got damaged. I have had mine done twice. And I carried my side pipes up there to save having to make boxes. Nice people. Tip: the polished silver ceramic (aluminum) finish oxidizes and turns dull after a few months.

Sam
Agree you can't go wrong with Jet Hot, they did a great job, fast , at a great price. George

Kenny B 06-12-2014 08:01 PM
John:

I used Specialized Performance Coating in Arlington. Michael is the contact.
817-274-1947

GLS-BDR226 06-12-2014 08:26 PM
I used Quality Powder Coating in Carrollton. Recoated my old headers and made them look new. Don't recall the cost.

- Quality Powder Coating

Roush #1 06-13-2014 07:51 AM
I am not sure who Car Chemistry in Waxahachie 972/937-7735 is using for their coatings, but it is holding up better than any I have tried before. Four years old and still look like new.

jayscobras 06-13-2014 10:01 AM
Nope
 
Have them ceramic coated over by my shop. Just three blocks away. Fast turn around. Usually 2-3 days and great work. Very reasonable pricing. I will edit this post with contact info after lunch.

Crosslink coating
11122 Morrison Drive
Dallas 75229
972-484-3322

dallas_ 06-13-2014 02:06 PM
Thanks guys, good suggestions. I appreciate it.
Since they are so close, I went with Jay's suggestion.
The pipes are at the coaters now.

I've used Jet Hot in OKC before. Mush Tullos was the guy there, but he is gone now. He was fantastic to work with. Very happy with what they did for me before.

G-Pete 06-14-2014 10:18 AM
Well, we coat in house.....;)

dallas_ 06-14-2014 10:20 AM
Quote:
Originally Posted by G-Pete (Post 1306096)
Well, we coat in house.....;)
In your house, or in your warehouse?
I'm not doing in in my house and I don't have a warehouse. ;)

G-Pete 06-14-2014 10:27 AM
Quote:
Originally Posted by dallas_ (Post 1306097)
In your house, or in your warehouse?
I'm not doing in in my house and I don't have a warehouse. ;)
In our powder coat facility John, - also we keep four outsource powder coater busy with our stuff. Patrick at Crosslink is a personal friend of mine and we share the same track 911 passion. He did my ceramic coat on my pipes...

dallas_ 06-14-2014 02:38 PM
Quote:
Originally Posted by G-Pete (Post 1306099)
Patrick at Crosslink is a personal friend of mine and we share the same track 911 passion.
His shifter karts look like a lot of fun too. :)

rbickle 06-14-2014 05:48 PM
Ceramic Coating
 
Quote:
Originally Posted by jayscobras (Post 1305960)
Have them ceramic coated over by my shop. Just three blocks away. Fast turn around. Usually 2-3 days and great work. Very reasonable pricing. I will edit this post with contact info after lunch.

Crosslink coating
11122 Morrison Drive
Dallas 75229
972-484-3322
Second that.

I just had my side pipes done at Crosslink. Talked to Rich, the owner down here in Cedar Hill. He took them up to dallas to do the coating, and brought them back for me. Very nice job.

They did the side pipes for $350.

Rick

Roush #1 06-14-2014 09:18 PM
We have a Crosslink Powder Coating in McGregor, just west of Waco. Is that the same company?


All times are GMT -7. The time now is 06:04 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: