|
I picked a Engine !!!!!
Ok well it did take a little more than 3k for a full roller engine .
The Winner is Motorsports 392 /351w advertised @ 430 hp with 450 lbs of torgue . Yeap 392w with a bullet proof T5 tranny .... ---------------- Ed , Greg , I have Started !!!!! The tranny is here and the Engine is on the way .. Tube a arms are next . Oh by the way ANYONE have a T5 Bell Housing in the way and need to find a good home for it ? Thanks to Leif Johnson Ford Mustang Mendez |
Shhh....try not to say "bullet proof" in public. :3DSMILE:
And make sure you say T5Z instead of T5. Big difference. Now the big question -- what are you gonna put it in? Do you have a Cobra chassis??? I have a spare in my garage that I might let go cheap. :LOL: :LOL: :LOL: Cheers! http://www.avn-tech.com/stuff/cobras_2_garage.jpg |
Bell Housing
I think you better try and find a Lakewood or similar scatter shield. I would hate to see you tear up more than a clutch later on when you decide to put your foot in it....and you will.
Good Choice by the way. |
Dune Buggy Chassis
How much do you want for that spare chassis? I always wanted a dune buggy to drive around here in Austin.:LOL:
|
T 5 zzzzzz
Ok T5zzzzz
That's ok Cobra Dude I KNOW WHERE YOU LIVE !!! As for a dune buggy hmmm doesn't sound like a bad idea ED ! I could proberly make it to the next annual event . {Scatter shield} if the engine turns CCW would it not sling out of the passenger side ? If not well I guest I should look into this one . By the way I will have a full roller 302 long block for sell freshly built if any one needs a spare, 2k lots of good stuff .. Will post soon ! Mustang Mendez |
Bullet proof T5 is like saying Army intelligence, it just doesn't exist. If you don't break it, you are not driving hard enough. :3DSMILE::D:3DSMILE:
|
Tony,
I went through my garage and found that spare T5 bellhousing. Its yours if you want to come by and pick it up. I was planning to bring it to the meet last Saturday, but I got waylaid at the last second. Although you may still want to do a scatter shield with that much horsepower - you can use the bellhousing to at least fit the components. |
[ This is Cobra Dude using Tony's computer... ]
Ed, I've decided not to sell. With the welding class, I'm thinking I have enough metal here to build a lift for my garage. Plus, look at the amount of hp that's on it -- 200+ hp should lift my car is less than a second. :JEKYLHYDE :JEKYLHYDE :JEKYLHYDE Cheers! |
| All times are GMT -7. The time now is 08:20 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: