|
92 5.0 efi upgrade questions
My motor is stock just as Ford delivered it in the 92 GT, except there are no EGR, smog pump, etc. I am looking at getting an Explorer intake but you know how that goes.....
While I have the intake off should I change the injectors? If so then what size? I found some 30# and a Pro-M 75 mass air at a reasonable price. If I do that will I also need a larger fuel pump? This is my first Ford motor and I am still learning.... Thanks James Ultimate goal is to open up the breathing, add GT-40 heads and a 5-7 PSI blower so I want the parts to be able to make the jump. |
The 30# injectors will be a good choice for your blower upgrade but are not neccessary for your current combo even with the better intake. The injectors are easy to change later by removing the upper intake. If you can afford them go for it, if not then don't worry. I had 30# injectors on mine for a while without the blower and they work fine on a basic street motor.
|
James
I have some up grades for you mass air flow,cold air induction and throtle body need ck brands and more info give me a ring
512-738-1835 T |
With a blower in the future, go with the 30lbs. They will still work fine with the other mods before the blower goes on. Well,,,they might be a little rich, 24 would be ideal without blower, and work fine WITH a blower IF the psi was around 5 or so. But 30's at the right price would be OK and you can add more than 5 psi boost later with no problem.
By the way, 5 psi is a good pressure to work with. The engine will "live" longer, give OK increase in power, etc. More than 5 psi, you gotta start thinking about, pistons, bottom end, strength in general. Ernie |
| All times are GMT -7. The time now is 02:33 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: