|
Found and fixed some issues
since rain decided to come back I started dealing with some little issues and redoing some things I think need attention. First I took the drivers side exhaust apart to find what the problem was ( a bad weld) which started sending the collectors out of the flange which explains why my sidepipe seemed to close to the body. 2nd started flushing the coolant and found some unwanted crap in the coolant, and I found to much gasket maker on the oil pan with the cork gasket so I am dropping the pan and redoing it the right way, plus lets me look at the rotating assembly and clean, maybe power the pan, and clean it really good.
|
| All times are GMT -7. The time now is 02:41 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: