Club Cobra
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Club Cobra (http://www.clubcobra.com/forums/)
-   Thor Motorsports (TWM Induction) (http://www.clubcobra.com/forums/thor-motorsports-twm-induction/)
-   -   TWM Induction systems for your Cobra from Thor Motorsports. (http://www.clubcobra.com/forums/thor-motorsports-twm-induction/68398-twm-induction-systems-your-cobra-thor-motorsports.html)

xlr8or 09-08-2009 10:29 PM
Mike I have a friend here in San Diego with the TWM on a KC 514 using the FAST computer. I'm sure he wouldn't mind sharing the injector/pressure details or even the current tune if you want..
Send me an email and I'll get you in touch with him.

Mohuska 09-08-2009 10:29 PM
TWM set up
 
Going to try attaching a pic.

http://www.badasscars.com/cartimages/prd_lp_79.jpg

priobe 09-09-2009 06:40 AM
Quote:
Originally Posted by thorconstr (Post 980991)
Yes it is expensive, but so are Webers. I guess it boils down to what you want and can afford.

Thor,

I looked into the TWM system and I am still not sure as the pricing. Based on a Ford FE (already have the intake for Webers) I dont want to change the intake because it is port matched to heads.

Now it seems the pricing like others have mentioned is around 9K ish when all done for complete system. Is this correct?

What is missing from the package you are offering?

And it seems as if the Webers are a fraction of this system, please explain.

thorconstr 09-09-2009 07:12 AM
Quote:
Originally Posted by priobe (Post 981853)
Thor,

I looked into the TWM system and I am still not sure as the pricing. Based on a Ford FE (already have the intake for Webers) I dont want to change the intake because it is port matched to heads.

Now it seems the pricing like others have mentioned is around 9K ish when all done for complete system. Is this correct?

What is missing from the package you are offering?

And it seems as if the Webers are a fraction of this system, please explain.
No webers in the system, throttle bodies. I sell complete TWM setups with a ECU and sensors between $6,500 and $7,500 for a small block or 427. email me with your engine spec for pricing. Thanks, Al thormotorsports1@msn.com

priobe 09-09-2009 07:20 AM
ok Al

Sent to email

Thanks

I was mentioning that the Weber setup is a fraction of the cost. I do understand that you setup are throttle bodies and injectors


All times are GMT -7. The time now is 07:40 AM.
Page 3 of 3 12 3
Show 20 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: