|
Yeah, I found the Gorilla nuts and ordered some today.
Thanks again! Tom Walgamuth |
Quote:
Tom |
Tom, I sent you a PM regarding the Compomotive wheels.
|
Thanks Tex!
|
Can these compomotive wheel centers have five lug holes added in the blank spaces? If so who would do that please?
|
If it can be done, any competent machine shop should be able to do it for you, although you might gawk at the price.
The best thing to do would be to make a drawing, even a hand drawing, of exactly what you want so there is no confusion. If you need a few shops, I might be able to get you a few. |
Thanks Joy!
Upon further inspection the place on the front which looks like a good place to drill additional holes is a void behind, so would not work for me. Thanks for your thoughts! |
Compomotive Rims
Are these rims still available as I need 2 - 17" rims, one at @ 8' wide for the front and then the rear at @ 10" wide. I am utilizing Mustang spindles on my current cobra so I believe the lug spacing specs should match. If they are still available, please let me know and I will get the actual measurements and backspacing specs that I will be needing to replace and see if we have a possible match.
Thanks |
Just discovered your post. Yes, I still have the 17” Compomotive HB wheels. Widths are 8 and 10 and are Ford bolt pattern. The wheels are in like new condition.
|
Thanks for the reply, will attempt to confirm the specs needed for the replacement rims this weekend.
|
Quote:
I am open to purchase them. Thanks. |
Unfortunately, the spinners for these wheels have been sold. I actually had two complete sets of Compomotive spinners. Sold both sets a while back and could sell several more sets if I had them.
|
I will be needing a 10" wheel with a 6" backspacing and then a 9" wheel with a 5.5" backspacing. Both 17" lug style wheels with the Ford 4.5 bolt pattern.
If you could please confirm if the two rims you have would magically have these specs and let me know, I would greatly appreciate it. Thanks |
Wheel Measurement
I will send you a PM
|
| All times are GMT -7. The time now is 05:42 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: