- -
Billboard Gallery
(
http://www.clubcobra.com/forums/tires-wheels/96849-billboard-gallery.html)
| Silverback51 |
05-12-2009 07:41 AM |
Quote:
Originally Posted by sideoiler10
(Post 948495)
Not sure whether or not the Ranger paint can be thinned for spraying. The can I used was pretty thin from the start. I had to give them 3 coats to get a nice white coverage.
I have yet to drive with the tires. I had them balanced and installed on the car just about the time I began having heart problems, so I sort of lost interest in the tires. To make a long story short, it will be about a month until I can drive due to having a triple by-pass last week. Everything is cool now, just waiting for the days to wind by.
I have enjoyed keeping up with you guys about the BB group purchase. As I had previously posted I got in just after the group buy was finished. Jerry was kind enough to extend the same deal.
I currently have 26 lbs in the front and 25 in the rear. Thought that might be a good place to start.
Have any of you had much problem with the tires throwing pebbles up under the fenders (really hard) or chipping the front face of the rear fenders?
Keep the tire comments coming. Thanks, Bob
|
They can throw rocks hard enough to star the paint. Some have lined the inner fender well with a rubber material to prevent this. I used a gallon of Herculiner (Truck Bed Liner) to cover the inside of my fender wells. Seems to be working fine.
Hope you recover soon and can get back to enjoying your car.
|
question for ou812545
how much did you lower your car after you installed the goodyear billboards? thanks:)
|
| ou812545 |
05-12-2009 01:10 PM |
I lowered the car 1/2" with the 15" Billboards. It was already lowered with 17" on it before lowering it further with the 15".
With a full tank and a passenger I have not had any rubbing issues.
|
| RedCSX1 |
05-12-2009 03:41 PM |
Here are mine on CSX4766
1 Attachment(s)
nice look for a Cobra.
|
| Allan A |
05-12-2009 05:47 PM |
The last photo looks like the door is bowing out?:3DSMILE:
|
| RodKnock |
05-12-2009 06:07 PM |
Man, the roll can't be the suspension's fault. Is that lean at about 25mph? :LOL:
|
Quote:
Originally Posted by Allan A
(Post 948638)
The last photo looks like the door is bowing out?:3DSMILE:
|
Have I mentioned lately how much my ass yearns for your sweet lips?
:p
|
Quote:
Originally Posted by RodKnock
(Post 948645)
Man, the roll can't be the suspension's fault. Is that lean at about 25mph? :LOL:
|
...and when Allan's done, don't be afraid to move right on in there.
:p
|
| All times are GMT -7. The time now is 09:50 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: