|
TKO 600 assembly
Trans guys; a couple of questions if I may. I removed the input shaft from my TKO to get it machined a little and need to get it back in. Question #1, what lube do you use to keep the bearings in the proper place the back of the I/S while installing it? I'm assuming it's some sort of soluble grease. #2 How many of those little bastages (bearings) are there supposed to be!? I might be doing some more magnet fishing.
Thanks, Steve |
I can't answer your question with a specific grease or roller count, but I would suggest you don't go "fishing" with a magnet. You'll magnetize any rollers you catch. That's not the place you want all of the metallic debris in the gearbox to end up.
A small amount of any petroleum-based grease should disperse into the tranny fluid without issue. If it's cold enough, Vaseline should work. |
There should be 17 pocket bearings.
|
Thanks Brent.
Jim, I have no choice, some of them fell down in the trans as I removed the input shaft. Steve |
| All times are GMT -7. The time now is 03:43 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: