|
mcleod racing slik stik for tko trans
was looking up info on clutches and came across this shifter. looks like it might be pretty nice unit, and looks like there are different offsets for the particular minded in where they want to put their stick.
http://mcleodracing.com/products/Sli...00+%26+600.mcl i am not associated with nor have vested interest in this company. |
This was actually developed by Red Roberts at McLeod, and I think it's marketed under his own company.
It's a very nice shifter, spring loaded, with stops, etc. As you mentioned, the best feature is that you can really tweak the position of the handle, up to several inches in each direction. Vect, if you're needing info on a specific clutch, let me know. I can also provide pricing for you, better than Summit/Jegs, etc, etc. |
i was looking at their website for instructions on how to set up the twin disc magnum force clutch. it has shims for the posts to position the fingers and i think puts different pressures on the setup.
thanks for the offer. you have anything on how to put a 8.8 irs together or a case spreader? |
I spoke to Red at McLeod this morning.
Holy smokes does that guy know his S%@^ or what????? I am upgrading from the single disc to the RST, and I will be talking to George at Rockland Standard about going with the Slik shifter. I have the Pro 5.0 now, which is good, Red says his shifter is that much better. E |
I can offer a decent Club Cobra discount on the McLeod stuff if you're interested....
|
Another question for this thread is, does anyone use the front shifter socket location in their Cobras? Just seems like you could get a more "normal" shifter handle location if that were done.
Steve |
No, but a lot of guys run the middle position, which is more of a 289 style location.
|
Brent,
Thanks, I have friends up at Lethal Performance and they are helping me with the clutch. Eric |
we need to get the kid with the wiggly ears and bouncing boobs together.
|
I think we would have motor-boatin!
E |
You crazy sailer you!
|
|
| All times are GMT -7. The time now is 08:08 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: