| saltshaker |
05-03-2011 04:38 PM |
Toploader not downshifting well
Going from 3rd to 2nd sometimes it won't go in...no grinding etc and if I throw in to 1st with the clutch ingaged it will then go in 2nd....no problems going 1st thru 4th
Jon
|
| redmt |
05-03-2011 06:40 PM |
Sounds like the synchro ring is sticking in #2 side of the 1-2 hub. Try shifting it a couple times without the clutch and see if it will slip in that way. If the ring is stuck it will be very difficult to shift it.
|
| racco |
05-03-2011 06:46 PM |
do you have a hurst shifter?
|
| saltshaker |
05-03-2011 06:52 PM |
Shifter
Just put a hurst in, had a factory ford shifter and it did the same thing.
Jon
|
| All times are GMT -7. The time now is 03:15 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
