|
Tko Transmission
I have a BB SPF 427 when I pulled the Transmission to replace the starter ring I found that it did not have but 1 dowel pin in the block an was using a Lakewood BH which needs to be indexed so the TKO will work properly, it has never shifted good every since I had it now I know why. I am trying to find the indexing tool to line it up, Does anyone know where I can get that tool,any help will be appreciated. Thans Flip. The motor an Transmission was put in bye Southern Motors
|
You need a magnetic base and dial indicator. Do you have a Lowes/Home Depot/Harbor Freight nearby?
|
|
Transmission
Thanks guys for the info. I ordered aSteeda short shifter for TKO got it today an found out I did not have a TKO but a TR3550 tremec didn't see the tag on Trandmission till I went to put on the shifter, have to send it back an get another. Anyone put a shifter on there 3550, my original has 6 boltholes, but the ones from Jegs an Summit have only 4 and is the 3650 the same size as the 3550. I am having to do this all because the starter ring got a bad place on it. :( Thanks guys Flip
|
Hey Flip, I've got a dial indicator and a mag base that you are welcome to use anytime. I used adjustable offset dowls from these guys:
RobbMc Performance Products - Bellhousing Alignment Dowels http://www.robbmcperformance.com/ima...cts/dowels.jpg Steve (You still have my info?) |
indexing lakewood bellhousing
Hi Hammer thanks for the offer, but I went to Horbour Freight an bought one for 24 dollars. Had to modify it a little. I cut the shaft coming out of the magnetic base off to about 3 inches an took the grinder an cut two flatsides on it where I could bolt the dial indicator on where it would line up with the hole for the transmission. It worked perfect, I do need to get some of those dowels you mentioned. We got it to specs at +.005. It been out at lease .035 every since I had it. It never shifted good. They just bolted it on an did not check it, Maybe it will work better being indexed. Thanks again Flip If anybody wants a pic of my modified indexing tool let me know
|
| All times are GMT -7. The time now is 02:34 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: