|
Mcleod 1400 Blown After 250 miles
Hey guys I have a superformance cobra 2004 SPF# 1983, With a Kieth Craft 496. I was trying to fix a few oil leaks one leak was comming from the internal throw out bearing. We decided to replace it an so we did. We replaced it with a McLeod 1400 Internal. I put about 250 Miles on it and it blew. When we pulled it out to take a look it was missing two screws an 4 others were not tight at all . I posted a link to a pic of it. The two missing screws I have circled in yellow. The one on the right you could see an o-ring comming out of it. If been reading some threads that state some leak issues with this slave cylinder but nothing like this . Any thoughts ? Please advise :confused:
Slave cylinder | Flickr - Photo Sharing! |
| All times are GMT -7. The time now is 05:21 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: