09-07-2015, 12:47 AM
|
 |
CC Member
|
|
|
Join Date: Feb 2006
Location: Gore. New Zealand.,
SI
Cobra Make, Engine: DIY Coupe, F/T ,MkIV.
Posts: 808
|
|
Not Ranked
Quote:
Originally Posted by Eckerz01
I don't know if this is relevant guys I have rebuilt a lot of top loaders and I do not believe they use a washer under the bolt.I don't think it a big issue except for a small amount pressure loss on the spring.
|
Some do some don't, most jerico 4 spds seem to use an allen socket head cap screw that is cut/ground to the reqd length. If the trans had a washer and it is not fitted on reassembly it will increase the detent spring load slightly, or worst case if the wrong/longer bolt was fitted it may prevent selection of either 3rd or 4th altogether.
__________________
Jac Mac
|
1Likes
Threaded Mode
