Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Transmission Talk (http://www.clubcobra.com/forums/transmission-talk/)
-   -   Bolting up a Quicktime to a Toploader (http://www.clubcobra.com/forums/transmission-talk/131417-bolting-up-quicktime-toploader.html)

crenbbf 10-21-2014 12:17 PM
Bolting up a Quicktime to a Toploader
 
Hi All

I could do with a bit of advice regarding which type of bolts to use.

My Toploader did not have any bolts attached and there are none with the bell.

The bell does have the bell to engine bolts.

The bell is a 6057 so not SFI but looking at the kits the only visible difference is the block plate to bell housing bolts is this the case?

Which bolts do you recommend for both the bell to block plate and also bell to trans ?

cheers Kiel

hisss snake 10-27-2014 03:58 PM
quick time to toploader
 
I would suggest only grade 8 bolts and nuts for bell to block plate and grade 8 bolts between bell and toploader . My quicktime was sfi rated so came with all hardware which was all grade 8 .

crenbbf 10-28-2014 12:26 AM
Ok grade 8 it is

thanks for the reply

Kiel

mickmate 10-28-2014 05:13 AM
They come with socket heads as some of the bolt pads are a tad small or just a trick to get a spanner on.


All times are GMT -7. The time now is 05:57 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: