- -
Deeper pilot bushing
(
http://www.clubcobra.com/forums/transmission-talk/146580-deeper-pilot-bushing.html)
| eschaider |
01-23-2023 12:56 PM |
Quote:
Originally Posted by cobragene
(Post 1513997)
Sunman I am dealing with Modern drive now about the oversize
|
If you go to the MDL site the pilot bearing you most likely want to use is, click here => FE Pilot Bearing
This bearing is solid bronze, 1.850" OD with a 0.670" ID and 0.900 tall for a Tremec 26 spline input shaft. If your trans uses the smaller 0.590" OD input shaft you have two other choices.
Choice #1 1.850" OD with a 0.590" ID 0.500" long (standard length)
Choice #2 1.850" OD with a 0.590" ID 0.900" long (extended length)
Link to Choice #1 => Std Length FE Brg
Link to Choice #2 => Extended Length FE Brg
Pick your poison ... |
| cobragene |
01-23-2023 05:19 PM |
That is the one I ordered and you see what they sent me, I am in contact with them to straighten it out.
|
| patrickt |
01-23-2023 06:28 PM |
Quote:
Originally Posted by cobragene
(Post 1514006)
That is the one I ordered and you see what they sent me, I am in contact with them to straighten it out.
|
What? You expect today's vendors to actually send you the correct part? You're lucky they even answered the phone after you called to tell them they sent you the wrong one.:cool: |
| eschaider |
01-23-2023 06:41 PM |
Quote:
Originally Posted by patrickt
(Post 1514007)
What? You expect today's vendors to actually send you the correct part? You're lucky they even answered the phone after you called to tell them they sent you the wrong one.:cool:
|
Ahhh, I yearn for the days of the Checker Superba Series E, El-Supremo ... |
| cobragene |
01-24-2023 06:47 PM |
Modern drive line is stepping up to the plate and are going to pay my machinist to turn the pilot bushing to the correct size. I know where I am going to purchase my TKX in the near future.
|
| All times are GMT -7. The time now is 11:48 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
