|
Toploader slave cylinder
looking for photos of slave cylinder mounting to a toploader 4 speed. I have a Willwood pull cylinder on my toploader / 429SCJ and need a better method of mounting. Push or pull doesn't matter, just looking for what you guys have done.
|
2 Attachment(s)
This approach is good for ERA's w/FE engines. It is out of the ERA manual, if I remember correctly. I am not sure how applicable to the 385 series engines it will be but it is at least good for some ideas.
|
Quote:
close ratio Toploader. Went with McLeod HTOB #1305 (bolt on). 5 years/5000 miles with no issues/leaks of any kind so far. |
1 Attachment(s)
I found a random slave cylinder, allowing for 38 mm of stroke length.
The white sheet is a friction reducer because the fork touches the frame. Engine is mounted solid. |
Thanks guys, good ideas.
|
I went with a McLeod dual disk clutch, internal hydraulic throwout bearing. It solved ALL of my problems
|
Slave Cylinder
I fabricated this setup for my side oiler. This should apply for most applications and can be done on a bench with the bell housing to achieve the correct geometry. I even modified the fork to assist in clearances. Something to think about. Works great:
http://www.clubcobra.com/forums/ever...tion-4-fe.html |
| All times are GMT -7. The time now is 06:14 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: